Sensors & Modules
0-0.5 MPA 0-72.5 PSI WATER GAS PRESSURE SENSOR DC 5V
It can measure the pressure of non-corrosiveness liquid and output linear analog voltage. Features:- Working Voltage VCC: 5.0 V DC- Output Voltage: 0.5-4.5V DC, Vout = VCC*(0.75*Pressure +..
0.5Watt 8R mini Round Speaker 36MM
Product Name : Magnet Speaker;Power : 0.5WResistance : 8 Ohm;Type : Internal MagnetShape : Round;Magnet Diameter : 16mm/ 0.63"Size : 36 x 4.8mm/1.4" x 0.2"(D*T);Material : Magnet,Metal, Plastic..
1 Channel Tilt sensor SW-520D
Product Description1.Sensor can sense changes in body angle.2.Adjustable sensitivity (shown in blue digital potentiometer adjustment).4.Operating Voltage 3.3V-5V.5.Output format: digital switching out..
1 meter NTC thermistor 10 k
Thermistor cable with waterproof probe for temperature measurement. Great advantage is also the 1 meter long cable on the end connector.Specifications:Stainless steel case, waterproofMeasurement range..
-70% 10 W LED with Color Temperature of 4000-4500 K
OverviewThis 10 W LED with 4000 K to 4500 K color temperature is widely used in various electronic products. It is ideal to use as LED light in your projects.Color temperature can be measured by unit ..
-70% 10 W LED with Color Temperature of 6000-6500 K
verviewThis 10W LED with 6000 K to 6500 K color temperature is widely used in various electronic products. It is ideal to use as LED light in your projects.Color temperature can be measured by unit of..
-67% 100 W LED with Color Temperature of 4000-4500 K
OverviewThis 100 W LED with 4000 K to 4500 K color temperature is widely used in various electronic products. It is ideal to use as LED light in your projects.Color temperature can be measured by unit..
-54% 100 W LED with Color Temperature of 6000-6500 K
verviewThis 100W LED with 6000 K to 6500 K color temperature is widely used in various electronic products. It is ideal to use as LED light in your projects.Color temperature can be measured by unit o..
-84% 100K 1% NTC Temperature Sensor
Thermistor 100k NTC with 1 Meter Cable Temperature SensorThis is Thermistor 100k NTC with 1 Meter Cable Temperature Sensor for 3D Printer Reprap. The thermistor is a thermally sensitive resi..
10MM RGB LED Module Light Emitting Diode
Product descriptionType : Voltage RegulatorDissipation Power : 1Operating Temperature : 1Supply Voltage : 5VModel Number : 10MM RGB LED Moduleis_customized : YesBrand Name : diymoreApplication : Compu..
-72% 12 A Adjustable Step Down DC-DC Module
This is DC/DC step down regulator module, adjustable +1.8 to 36Vdc output voltage at maximum output current of 12A. Ideal for battery operated projects requiring a higher current regulated power..
-63% 12 A Low Ripple Adjustable Step-Down DC-DC Converter
This product is a step-down voltage source with a medium power that can provide voltage between 1.25 V and 30 V, starting from 4.5 V to 30 V.It uses high-quality capacitors and has a low output ripple..
12V NORMALLY OPEN ELECTRIC CONTROL SOLENOID DISCOURAGED AIR WATER VALVE
Specifications:Rated voltage: DC12VCurrent: 120mA7PSI pressure flow: 11L / minWeight: Normally Open 55 grams..
-52% 16-Channel 12-bit PWM and Servo Shield for Arduino
This shield is perfect if you want to build a robot, perhaps a hexapod or a project that requires several components that require movement. It is also ideal in controlling many LEDs with precise ..
-69%