Arduino UNO R3 (ORIGINAL CHIP )

SKU: WS-00001
In Stock
13.00 JOD 9.34 JOD
In Stock
Other people want this. 3 people have this in their carts right now.
SKU: WS-00001 Category:

The Arduino Uno R3 is part of the Arduino family of microcontroller boards. It is designed to be user-friendly and is commonly used by hobbyists, students, and professionals alike. The board is based on the ATmega328P microcontroller, and it features a simple and flexible design that makes it easy to connect to various sensors, actuators, and other electronic components.

 

الأردوينو أونو R3 هو جزء من عائلة الأردوينو لوحات تحكم الميكروكنترولرات. تم تصميمه ليكون سهل الاستخدام ويستخدم على نطاق واسع من قبل الهواة والطلاب والمحترفين على حد سواء. تستند اللوحة إلى الميكروكنترولر ATmega328P ، وتتميز بتصميم بسيط ومرن يسهل الاتصال بمستشعرات مختلفة ومشغلات وغيرها من المكونات الإلكترونية.

Description

Arduino UNO R3 (ORIGINAL CHIP ) with USB cable

Description:

The Arduino Uno R3 is part of the Arduino family of microcontroller boards. It is designed to be user-friendly and is commonly used by hobbyists, students, and professionals alike. The board is based on the ATmega328P microcontroller, and it features a simple and flexible design that makes it easy to connect to various sensors, actuators, and other electronic components.

Key Features:

  1. Microcontroller: ATmega328P
  2. Operating Voltage: 5V
  3. Input Voltage (recommended): 7-12V
  4. Input Voltage (limits): 6-20V
  5. Digital I/O Pins: 14 (of which 6 provide PWM output)
  6. Analog Input Pins: 6
  7. DC Current per I/O Pin: 20 mA
  8. DC Current for 3.3V Pin: 50 mA
  9. Flash Memory: 32 KB (ATmega328P)
  10. SRAM: 2 KB (ATmega328P)
  11. EEPROM: 1 KB (ATmega328P)
  12. Clock Speed: 16 MHz
  13. USB Interface: ATmega16U2

Specifications:

  1. Power Supply:
    • The Arduino Uno can be powered via the USB connection or an external power supply.
    • The recommended voltage for the external power supply is 7-12V.
    • The board contains a voltage regulator that allows it to operate at 5V.
  2. Input/Output:
    • The board has 14 digital input/output pins, of which 6 can be used for PWM output.
    • There are 6 analog input pins.
    • The board has a USB connection for programming and power.
  3. Microcontroller:
    • The heart of the Arduino Uno R3 is the ATmega328P microcontroller.
  4. Programming:
    • The Arduino Uno can be programmed using the Arduino Software (IDE), which is based on the Processing programming language.
  5. Communication:
    • The board has a USB-to-serial converter chip (ATmega16U2) that facilitates communication between the computer and the microcontroller.
  6. Clock Speed:
    • The microcontroller operates at a clock speed of 16 MHz.
  7. Memory:
    • The ATmega328P microcontroller has 32 KB of flash memory for storing the program.
    • It has 2 KB of SRAM for runtime data storage.
    • 1 KB of EEPROM for non-volatile storage.
  8. Dimensions:
    • The board dimensions are approximately 2.7 x 2.1 inches (68.6 x 53.3 mm).

الوصف:

الأردوينو أونو R3 هو جزء من عائلة الأردوينو لوحات تحكم الميكروكنترولرات. تم تصميمه ليكون سهل الاستخدام ويستخدم على نطاق واسع من قبل الهواة والطلاب والمحترفين على حد سواء. تستند اللوحة إلى الميكروكنترولر ATmega328P ، وتتميز بتصميم بسيط ومرن يسهل الاتصال بمستشعرات مختلفة ومشغلات وغيرها من المكونات الإلكترونية.

الميزات الرئيسية:

  1. الميكروكنترولر: ATmega328P
  2. الجهد التشغيلي: 5 فولت
  3. الجهد الإدخال (الموصى به): 7-12 فولت
  4. الجهد الإدخال (الحدود): 6-20 فولت
  5. المداخل/المخارج الرقمية: 14 (منها 6 توفر إخراج PWM)
  6. المداخل الأنالوجية: 6
  7. تيار التيار المباشر لكل مدخل/مخرج رقمي: 20 مللي أمبير
  8. تيار التيار المباشر لدبوس 3.3 فولت: 50 مللي أمبير
  9. ذاكرة الفلاش: 32 كيلو بايت (ATmega328P)
  10. ذاكرة الوصول العشوائي (SRAM): 2 كيلو بايت (ATmega328P)
  11. EEPROM: 1 كيلو بايت (ATmega328P)
  12. سرعة الساعة: 16 ميجا هرتز
  13. واجهة USB: ATmega16U2

المواصفات:

  1. مصدر الطاقة:
    • يمكن تشغيل الأردوينو أونو عبر الاتصال بواسطة USB أو مصدر طاقة خارجي.
    • الجهد الموصى به لمصدر الطاقة الخارجي هو 7-12 فولت.
    • تحتوي اللوحة على منظم الجهد الذي يسمح لها بالعمل عند 5 فولت.
  2. المدخلات/المخرجات:
    • تحتوي اللوحة على 14 منفذًا للإدخال/الإخراج الرقمي ، منها 6 يمكن استخدامها للإخراج PWM.
    • هناك 6 مداخل أنالوجية.
    • اللوحة تحتوي على اتصال USB للبرمجة والطاقة.
  3. الميكروكنترولر:
    • قلب الأردوينو أونو R3 هو ميكروكنترولر ATmega328P.
  4. البرمجة:
    • يمكن برمجة الأردوينو أونو باستخدام برنامج الأردوينو (IDE) ، والذي يستند إلى لغة البرمجة Processing.
  5. الاتصال:
    • اللوحة تحتوي على رقاقة محول USB إلى سيريال (ATmega16U2) التي تيسر التواصل بين الكمبيوتر والميكروكنترولر.
  6. سرعة الساعة:
    • يعمل الميكروكنترولر بسرعة ساعة تبلغ 16 ميجا هرتز.
  7. الذاكرة:
    • الميكروكنترولر ATmega328P يحتوي على 32 كيلو بايت من ذاكرة الفلاش لتخزين البرنامج.
    • لديه 2 كيلو بايت من ذاكرة SRAM لتخزين البيانات أثناء التشغيل.
    • 1 كيلو بايت من EEPROM للتخزين غير القابل للفقد.
  8. الأبعاد:
    • أبعاد اللوحة تبلغ حوالي 2.7 × 2.1 إنش (68.6 × 53.3 مم).
  1. Power Supply:
    • The Arduino Uno can be powered via the USB connection or an external power supply.
    • The recommended voltage for the external power supply is 7-12V.
    • The board contains a voltage regulator that allows it to operate at 5V.
  2. Input/Output:
    • The board has 14 digital input/output pins, of which 6 can be used for PWM output.
    • There are 6 analog input pins.
    • The board has a USB connection for programming and power.
  3. Microcontroller:
    • The heart of the Arduino Uno R3 is the ATmega328P microcontroller.
  4. Programming:
    • The Arduino Uno can be programmed using the Arduino Software (IDE), which is based on the Processing programming language.
  5. Communication:
    • The board has a USB-to-serial converter chip (ATmega16U2) that facilitates communication between the computer and the microcontroller.
  6. Clock Speed:
    • The microcontroller operates at a clock speed of 16 MHz.
  7. Memory:
    • The ATmega328P microcontroller has 32 KB of flash memory for storing the program.
    • It has 2 KB of SRAM for runtime data storage.
    • 1 KB of EEPROM for non-volatile storage.
  8. Dimensions:
    • The board dimensions are approximately 2.7 x 2.1 inches (68.6 x 53.3 mm).
    • المواصفات:

      1. مصدر الطاقة:
        • يمكن تشغيل الأردوينو أونو عبر الاتصال بواسطة USB أو مصدر طاقة خارجي.
        • الجهد الموصى به لمصدر الطاقة الخارجي هو 7-12 فولت.
        • تحتوي اللوحة على منظم الجهد الذي يسمح لها بالعمل عند 5 فولت.
      2. المدخلات/المخرجات:
        • تحتوي اللوحة على 14 منفذًا للإدخال/الإخراج الرقمي ، منها 6 يمكن استخدامها للإخراج PWM.
        • هناك 6 مداخل أنالوجية.
        • اللوحة تحتوي على اتصال USB للبرمجة والطاقة.
      3. الميكروكنترولر:
        • قلب الأردوينو أونو R3 هو ميكروكنترولر ATmega328P.
      4. البرمجة:
        • يمكن برمجة الأردوينو أونو باستخدام برنامج الأردوينو (IDE) ، والذي يستند إلى لغة البرمجة Processing.
      5. الاتصال:
        • اللوحة تحتوي على رقاقة محول USB إلى سيريال (ATmega16U2) التي تيسر التواصل بين الكمبيوتر والميكروكنترولر.
      6. سرعة الساعة:
        • يعمل الميكروكنترولر بسرعة ساعة تبلغ 16 ميجا هرتز.
      7. الذاكرة:
        • الميكروكنترولر ATmega328P يحتوي على 32 كيلو بايت من ذاكرة الفلاش لتخزين البرنامج.
        • لديه 2 كيلو بايت من ذاكرة SRAM لتخزين البيانات أثناء التشغيل.
        • 1 كيلو بايت من EEPROM للتخزين غير القابل للفقد.
      8. الأبعاد:

        • أبعاد اللوحة تبلغ حوالي 2.7 × 2.1 إنش (68.6 × 53.3 مم).

Reviews

There are no reviews yet.

Be the first to review “Arduino UNO R3 (ORIGINAL CHIP )”
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare